Configuring Round-Trip Delay Thresholds; Establishing The Configuration Task - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
timeout 20
nqa status : normal

6.29 Configuring Round-Trip Delay Thresholds

This section describes how to set a round-trip delay transmission threshold in an NQA test
instance.

6.29.1 Establishing the Configuration Task

Before setting a round-trip transmission delay threshold, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
If the round-trip transmission delay threshold is configured for a NQA test instance, the NQA
test result will contain the statistics on the test packets that exceed the set threshold. This provides
the basis for the network manager to analyze the operation status of the specified service.
Pre-configuration Tasks
Before configuring the round-trip transmission delay threshold, complete the following tasks:
l
l
Data Preparation
To configure the round-trip transmission delay threshold, you need the following data.
No.
1
2
6.29.2 Configuring Round-Trip Delay Thresholds
This part describes how to set a round-trip transmission delay threshold. When the transmission
duration exceeds the threshold, a trap message is sent to the Network Management System
(NMS).
Context
Do as follows on the switch to perform the NQA test:
Procedure
Step 1 Run:
Issue 01 (2012-03-15)
Running the device normally
Creating NQA test instances and configuring related parameters correctly
Data
Administrator name and test name
Round-trip transmission delay threshold
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
363