Huawei S9300 Configuration Manual page 488

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
NQA alarm information:
------------------------------------------------------
NQA Alarm Max: 5
------------------------------------------------------
<SwitchA> display nqa-agent
NQA Tests Max:2000
NQA Flow
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.20
frequency 5
alarm 10 lost-packet-ratio 2 rising-threshold 100 10 falling-threshold 10 10
nqa status : normal
----End
Configuration Files
l
l
Issue 01 (2012-03-15)
Max:1000
Configuration file of Switch A
#
sysname SwitchA
vlan batch 10 20
#
interface Vlanif10
ip address 11.1.1.1 255.255.255.0
#
interface Vlanif20
ip address 11.1.2.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface NULL0
#
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.20
frequency 5
start now
alarm 10 lost-packet-ratio 2 rising-threshold 100 10 falling-threshold 10 10
#
snmp-agent
snmp-agent local-engineid 000007DB7F00000100000B31
snmp-agent sys-info version v2c v3
snmp-agent target-host trap address udp-domain 11.1.2.8 params securityname
alarm v2c
#
return
Configuration file of Switch B
#
sysname SwitchB
vlan batch 10
#
interface Vlanif10
ip address 11.1.1.20 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NQA Alarm Number: 1
NQA Tests Number:
NQA Flow Remained:1000
6 NQA Configuration
1
473