Netstream Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
About This Chapter
This chapter describes working principle of the NetStream and provides several configuration
examples.
Context
7.1 Overview of NetStream
This section describes the working principle of NetStream.
7.2 NetStream Features Supported by the S9300&S9300E
This section describes the NetStream features supported by the S9300&S9300E.
7.3 Collecting IPv4 Traffic Statistics
This section describes how to collect statistics about IPv4 traffic passing through an interface.
7.4 Collecting IPv6 Traffic Statistics
This section describes how to collect statistics about IPv6 traffic passing through an interface.
7.5 Configuring the Aggregation Statistics About IPv4 Traffic
This section describes how to configure the statistics about IPv4 aggregation traffic passing an
interface.
7.6 Configuring the Flexible NetStream Feature
This section describes how to configure the Flexible NetStream feature to flexibly create
NetStream statistics according to records.
7.7 Configuring the Mapping of NetStream Interface Indexes
This section describes how to configure the mapping of NetStream interface indexes.
7.8 Maintaining NetStream
This section describes how to clear NetStream statistics and debug NetStream.
7.9 Example for Configuring NetStream
Issue 01 (2012-03-15)
7
NOTE
After the NetStream function is enabled on an S9300&S9300E, you cannot configure the IP source trail
function on this S9300&S9300E. To configure the IP source trail function, you must disable the NetStream
function of the S9300&S9300E.
Currently, only the enhanced boards support the NetStream function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

NetStream Configuration

7 NetStream Configuration
500