Configuring The Pwe3 Ping Test To Check The One-Hop Pw; Establishing The Configuration Task - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Context
Procedure
l
l
l
l
----End
Example
Run the display nqa-agent command. If information about the NQA test is displayed, it means
that the test is successful. For example:
<Quidway> display nqa-agent admin aa verbose
nqa test-instance admin aa
test-type mtrace
destination-address ipv4 11.1.6.4
mtrace-last-hop-address ipv4 11.1.5.1
mtrace-source-address ipv4 11.1.0.1
mtrace-group-address ipv4 225.0.0.1
nqa status : normal
6.24 Configuring the PWE3 Ping Test to Check the One-Hop
PW
This section describes how to configure a PWE3 ping test to check the connectivity of a single-
hop pseudo-wire (PW).

6.24.1 Establishing the Configuration Task

Before configuring a PWE3 ping test for a single-hop PW, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
Applicable Environment
To check the connectivity of the one-hop pseudo wire (PW) using LDP as the signaling protocol,
you can perform the PWE3 Ping test on the one-hop PW.
Pre-configuration Tasks
Before configuring the PWE3 Ping test on a one-hop PW, you must correctly configure the
dynamic one-hop PW.
Issue 01 (2012-03-15)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Run the display nqa-agent [ admin-name test-name ] [ verbose ] to view the status of the
test instance configured on the NQA client.
Run the display nqa results command to view the test results on the NQA client.
Run the display nqa history command to view the history of the NQA test.
Run the display mtrace statistics command to view the statistics of the MTrace packets.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
341