Huawei S9300 Configuration Manual page 374

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
l Run:
Issue 01 (2012-03-15)
NOTE
This parameter can be configured only for PWE3 Ping and PWE3 Trace test instances. If the signaling
protocol of the tunnel is BGP, this parameter is always ethernet for PWE3 Trace instances and cannot be
changed.
lsp-exp exp
The LSP EXP value is set for the NQA test instance.
NOTE
This parameter can be configured only for LSP Ping, LSP Trace, LSP Jitter, PWE3 Ping, and PWE3
Trace test instances.
lsp-replymode { no-reply | udp | udp-via-vpls | udp-router-alert | level-control-
channel }
The reply mode of LSPs is configured for the NQA test instance.
NOTE
This parameter can be configured only for LSP Ping, LSP Trace, LSP Jitter, PWE3 Ping, and PWE3
Trace test instances.
lsp-tetunnel tunnel interface-number
The outgoing interface is configured for the NQA test instance.
NOTE
This parameter can be configured only for LSP Ping, LSP Jitter and LSP Trace test instances.
mtrace-source-address ipv4 ip-address
The multicast source address is configured for the NQA MTrace test instance.
NOTE
This parameter can be configured only for MTrace test instances.
mtrace-last-hop-address ipv4 ip-address
The last hop address is configured for the NQA test instance.
NOTE
This parameter can be configured only for MTrace test instances.
mtrace-group-address ipv4 ip-address
The multicast group address is configured for the MTrace test instance.
NOTE
This parameter can be configured only for MTrace test instances.
mtrace-response-address ipv4 ip-address [ ttl value ]
The response address, namely, the destination address of the IGMP Tracert Response
message, is configured for the MTrace test instance.
NOTE
This parameter can be configured only for MTrace test instances.
mtrace-query-type { all-router | last-hop | destination | multicast-tree }
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
359

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents