Huawei S9300 Configuration Manual page 366

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Context
Procedure
Step 1 Run the display nqa results command to view the test results on the NQA client.
----End
Example
Run the display nqa results command. If the PWE3 Trace test on the one-hop PW is successful,
the following information is displayed.
l
l
l
<Quidway> display nqa results
NQA entry(test, pwe3trace) :testflag is inactive ,testtype is pwe3trace
Issue 01 (2012-03-15)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Statistics about errors
– Number of unroutable connections
– Number of wrong sequence numbers
– Timeout times of the test packets
History statistics of each test packet
– Timestamp added when each test packet is sent
– Timestamp added when each test packet is received
– Packets status displayed on the NQA client
Statistics of results of each test
– Number of successful tests
– Sum of the response time of all tests
– RTT square sum
– Minimum RTT and maximum RTT of the packet
– Destination IP address and the type of the destination IP address
– Number of the Echo packets and the sent packets
– Time when the last packet is received
1 . Test 1 result
The test is finished
Completion:success
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Drop operation number:0
Last good path Time:2009-2-28 0:42:37.5
1 . Hop 1
Send operation times: 3
Min/Max/Average Completion Time: 8/10/9
Sum/Square-Sum
Completion Time: 28/264
RTD OverThresholds number: 0
Last Good Probe Time: 2009-2-28 0:42:37.5
Destination ip address:3.14.2.14
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Attempts number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Receive response times: 3
6 NQA Configuration
351

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents