Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management

8.3.8 Checking the Configuration

After configuring RMON, you can view the traffic statistics collected by RMON.
Prerequisites
The configurations of the RMON are complete.
Procedure
l
l
l
l
l
l
----End
Example
Run the display rmon alarm command. If information about the alarm table is displayed, it
means that the configuration succeeds.
<Quidway> display rmon alarm 1
Alarm table 1 owned by Test300 is VALID.
Samples
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Run the display rmon event command. If information about the event table is displayed, it
means that the configuration succeeds.
<Quidway> display rmon event
Event table 1 owned by Test300 is VALID.
Description: null
Will cause log
Event table 2 owned by Test300 is VALID.
Description: forUseofPrialarm.
Will cause snmp-trap when triggered, last triggered at 0days 00h:26m:10s.73th.
Run the display rmon eventlog command. If information about the event logs is displayed, it
means that the configuration succeeds.
<Quidway> display rmon eventlog
Event table 1 owned by Test300 is VALID.
Generates eventLog 1.1 at 0days 00h:39m:30s.05th.
Description: The 1.3.6.1.2.1.16.1.1.1.6.1 defined in alarm table 1,
Run the display rmon history command to display the RMON history.
<Quidway> display rmon history
History control entry 1 owned by Test300 is VALID,
Issue 01 (2012-03-15)
Run the display rmon alarm [ entry-number ] command to view the RMON alarm
information.
Run the display rmon event [ entry-number ] command to view the RMON events.
Run the display rmon eventlog [ entry-number ] command to view the RMON event logs.
Run the display rmon history [ ethernet interface-number | gigabitethernet interface-
number | xgigabitethernet interface-number ] command to view the RMON history
information.
Run the display rmon prialarm [ entry-number ] command to view the information of the
RMON prialarmTable.
Run the display rmon statistics [ ethernet interface-number | gigabitethernet interface-
number | xgigabitethernet interface-number ] command to view the RMON statistics.
absolute value
when triggered, last triggered at 0days 00h:24m:10s.34th.
less than or equal to 100 with alarm value 0. Alarm sample type is absolute.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 1.3.6.1.2.1.16.1.1.1.6.1 <etherStatsBroadcastPkts.1>
: 30(sec)
: 500(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: 1975
8 RMON and RMON2 Configuration
541