Huawei S9300 Configuration Manual page 407

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Configure reachable routes between Switch A and the DNS server, between Switch A and the
host to be accessed, and between the DNS server and the host to be accessed. The configuration
details are not mentioned here.
Step 2 Create an NQA DNS test.
<Quidway> system-view
[Quidway] dns server 10.3.1.1
[Quidway] nqa test-instance admin dns
[Quidway-nqa-admin-dns] test-type dns
[Quidway-nqa-admin-dns] dns-server ipv4 10.3.1.1
[Quidway-nqa-admin-dns] destination-address url server.com
Step 3 Perform the test.
[Quidway-nqa-admin-dns] start now
Step 4 Verify the test result.
[Quidway] display nqa results test-instance admin dns
NQA entry(admin, dns) :testflag is inactive ,testtype is dns
1 . Test 1 result
10.3.1.1
----End
Configuration Files
Configuration file of Switch
#
sysname Quidway
#
dns server 10.3.1.1
#
vlan batch 100
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
nqa test-instance admin dns
test-type dns
destination-address url server.com
dns-server ipv4 10.3.1.1
#
ip route-static 10.3.1.0 255.255.255.0 10.1.1.2
#
return
Issue 01 (2012-03-15)
The test is finished
Send operation times: 1
Completion:success
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:
Min/Max/Average Completion Time: 1/1/1
Sum/Square-Sum Completion Time: 1/1
Last Good Probe Time: 2009-2-3 10:52:5.7
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 1
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
392