Huawei S9300 Configuration Manual page 504

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
nqa test-instance admin mtrace
test-type mtrace
destination-address ipv4 10.0.2.10
mtrace-last-hop-address ipv4 10.0.2.20
mtrace-source-address ipv4 10.0.40.90
mtrace-query-type last-hop
vpn-instance red
#
return
# Run the display nqa results command on Switch B. You can view that the RPF path from the
multicast source to the destination host is Switch E->Switch D->Switch B->Switch A.
<SwitchB> display nqa results test-instance admin mtrace
----End
Issue 01 (2012-03-15)
NQA entry(admin, mtrace) :testFlag is inactive ,testtype is mtrace
1 . Test 1 result The test is finished
Completions: success
Current Hop:4
SendProbe:1
Timeout Count:0
Drop Count:0
Responser:10.0.4.10
mtrace start time: 2008-12-31 14:16:46.2
Last Good Probe Time: 2007-2-7 17:36:18.3
Last Good Path Time: 2007-2-7 17:36:18.3
1 . Hop 1
Outgoing Interface Address: 10.0.2.20
Incoming Interface Address: 10.0.1.10
Prehop Router Address: 10.0.1.30
Protocol : PIM
Forward Ttl:1
SG Packet Count:0xffffffff
Input Packet Count:0
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
2 . Hop 2
Outgoing Interface Address: 10.0.1.30
Incoming Interface Address: 0.0.0.0
Prehop Router Address: 0.0.0.0
Protocol : Unknown
Forward Ttl:1
SG Packet Count:0xffffffff
Input Packet Count:0
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
3 . Hop 3
Outgoing Interface Address: 0.0.0.0
Incoming Interface Address: 10.0.4.50
Prehop Router Address: 10.0.4.10
Protocol : PIM
Forward Ttl:1
SG Packet Count:0xffffffff
Input Packet Count:0
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
4 . Hop 4
Outgoing Interface Address: 10.0.4.10
Incoming Interface Address: 10.0.40.80
Prehop Router Address: 0.0.0.0
Protocol : PIM
Forward Ttl:1
SG Packet Count:0xffffffff
Input Packet Count:0
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Query Mode: max-hop
Current Probe:1
ResponseProb:1
Busy Count:0
Max Path Ttl:5
Response Rtt: 50
Forward Code:NO_ERROR
Current Path Ttl:5
Hop Time Delay(ms):1
Output Packet Count:0
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:ADMIN_PROHIB
Current Path Ttl:4
Hop Time Delay(ms):1
Output Packet Count:0
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:NO_ERROR
Current Path Ttl:3
Hop Time Delay(ms):1
Output Packet Count:313
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:NO_ERROR
Current Path Ttl:2
Hop Time Delay(ms):0xffffffff
Output Packet Count:0
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
6 NQA Configuration
489