Huawei S9300 Configuration Manual page 134

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Figure 3-4 Networking diagram of configuring the interconnection of FTP servers and devices
in and out of the HGMP cluster (in NAT Mode)
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Issue 01 (2012-03-15)
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in the section
Cluster."
For the situation that Member-3 accesses the FTP server (2.0.0.1/8) out of the cluster:
l Run the cluster-ftp command on the member switch to set up a connection with the
public FTP server of the cluster.
For the situation that a device out of the cluster accesses the FTP server (Member-2):
l Calculate the port number reserved on the administrator switch for the FTP protocol of
a certain member switch in the cluster.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
"Example for Configuring Basic HGMP Functions for a
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
119