Huawei S9300 Configuration Manual page 437

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Step 4 Check test results.
[SwitchA-nqa-admin-icmpjitter] display nqa results test-instance admin icmpjitter
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result
----End
Configuration Files
l
l
Issue 01 (2012-03-15)
The test is finished
SendProbe:60
Completion :success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/3/1/65
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:3
Positive SD Number:18
Positive SD Sum:22
Positive SD Square Sum :32
Min Negative SD:1
Max Negative SD:2
Negative SD Number:21
Negative SD Sum:22
Negative SD Square Sum :24
Min Delay SD:0
Avg Delay SD:0
Max Delay SD:0
Delay SD Square Sum:4
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:1
jitter out value:0.5599658
NumberOfOWD:60
OWD SD Sum:4
ICPIF value: 0
TimeStamp unit: ms
Packet Rewrite Ratio: 0%
Packet Disorder Ratio: 0%
Fragment-disorder Ratio: 0%
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
nqa test-instance admin icmpjitter
destination-address ipv4
test-type icmpjitter
#
return
Configuration file of SwitchB
#
sysname SwitchB
#
vlan batch 10
#
interface Vlanif10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT
Square Sum:77
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:1
Positive DS Number:15
Positive DS Sum:15
Positive DS Square Sum :15
Min Negative DS:1
Max Negative DS:1
Negative DS Number:14
Negative DS Sum:14
Negative DS Square Sum :14
Min Delay DS:0
Avg Delay DS:0
Max Delay DS:0
Delay DS Square Sum:1
Packet Loss DS:0
Average of Jitter:1
Average of Jitter DS:1
jitter in value:0.3574005
Packet Loss Ratio: 0%
OWD DS Sum:1
MOS-CQ value: 0
Packet Rewrite Number: 0
Packet Disorder Number: 0
Fragment-disorder Number: 0
10.1.1.2
6 NQA Configuration
422

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents