Huawei S9300 Configuration Manual page 331

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Procedure
l
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l
l
l
<Quidway> display nqa results test-instance admin lsptrace
NQA entry(admin, lsptrace) :testflag is inactive ,testtype is lsptrace
3
3
Issue 01 (2012-03-15)
Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
Statistics about errors
– Number of unroutable connections
– Number of wrong sequence numbers
– Timeout times of the test packets
History statistics of each test packet
– Timestamp added when each test packet is sent
– Timestamp added when each test packet is received
– Packets status displayed on the NQA client
Statistics of results of each test
– Number of successful tests
– Sum of the response time of all tests
– RTT square sum
– Minimum RTT and maximum RTT of the packet
– Destination IP address and the type of the destination IP address
– Number of the Echo packets and the sent packets
– Time when the last packet is received
1 . Test 1 result
The test is finished
Completion:success
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Drop operation number:0
Last good path Time:2009-4-24 11:22:21.2
1 . Hop 1
Send operation times: 3
Min/Max/Average Completion Time: 50/60/56
Sum/Square-Sum
Completion Time: 170/9700
RTD OverThresholds number: 0
Last Good Probe Time: 2009-4-24 11:22:20.8
Destination ip address:30.1.1.2
Lost packet ratio: 0 %
2 . Hop 2
Send operation times: 3
Min/Max/Average Completion Time: 80/110/93
Sum/Square-Sum
Completion Time: 280/26600
RTD OverThresholds number: 0
Last Good Probe Time: 2009-4-24 11:22:21.2
Destination ip address:3.3.3.3
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
Attempts number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Receive response times:
Receive response times:
316

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents