Huawei S9300 Configuration Manual page 440

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
----End
Configuration Files
l
l
Issue 01 (2012-03-15)
Outgoing Interface Address: 11.1.2.2
Incoming Interface Address: 11.1.0.1
Prehop Router Address: 0.0.0.0
Protocol : PIM
Forward Ttl:1
SG Packet Count:13291852
Input Packet Count:0
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
Configuration file of Switch A
#
sysname SwitchA
#
multicast routing-enable
#
vlan batch 110 170
#
interface Vlanif110
ip address 11.1.5.1 255.255.255.0
pim sm
#
interface Vlanif170
ip address 11.1.6.3 255.255.255.0
igmp enable
pim sm
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 170
port hybrid untagged vlan 170
#
ospf 1
area 0.0.0.0
network 11.1.5.0 0.0.0.255
network 11.1.6.0 0.0.0.255
#
pim
#
return
Configuration file of Switch B
#
sysname SwitchB
#
multicast routing-enable
#
vlan batch 120 160 170
#
interface Vlanif120
ip address 11.1.4.1 255.255.255.0
pim sm
#
interface Vlanif160
ip address 11.1.3.1 255.255.255.0
pim sm
#
interface Vlanif170
ip address 11.1.6.2 255.255.255.0
igmp enable
pim sm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Forward Code:NO_ERROR
Current Path Ttl:2
Hop Time Delay(ms): 0xffffffff
Output Packet Count:0
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
6 NQA Configuration
,
425