Huawei S9300 Configuration Manual page 455

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure an NQA MTrace test on Switch C.
<SwitchC> system-view
[SwitchC] nqa test-instance admin mtrace
[SwitchC-nqa-admin-mtrace] test-type mtrace
[SwitchC-nqa-admin-mtrace] mtrace-source-address ipv4 11.1.0.2
[SwitchC-nqa-admin-mtrace] mtrace-group-address ipv4 225.1.1.1
[SwitchC-nqa-admin-mtrace] destination-address ipv4 11.1.6.4
[SwitchC-nqa-admin-mtrace] mtrace-query-type destination
Step 2 Perform the test.
[SwitchC-nqa-admin-mtrace] start now
Step 3 Verify the test result. You can find that the multicast path from the multicast source to the
destination host is Switch E-Switch D-Switch B.
[SwitchC-nqa-admin-mtrace] display nqa results test-instance admin mtrace
NQA entry(admin, mtrace) :testflag is inactive ,testtype is mtrace
1 . Test 1 result
Completions: success
Issue 01 (2012-03-15)
Test instance name: admin mtrace
IP address of the multicast source: 11.1.0.2
IP address of the multicast group: 225.1.1.1
IP address of the destination host: 11.1.6.4
The test is finished
Current Hop:3
SendProbe:1
Timeout Count:0
Drop Count:0
Responser:11.1.2.2
mtrace start time: 2009-2-7 17:26:53.2
Last Good Probe Time: 2009-2-7 17:26:53.3
Last Good Path Time: 2009-2-7 17:26:53.3
1 . Hop 1
Outgoing Interface Address: 11.1.6.2
Incoming Interface Address: 11.1.4.1
Prehop Router Address: 11.1.4.2
Protocol : PIM
Forward Ttl:1
SG Packet Count:255
Input Packet Count:9207
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
2 . Hop 2
Outgoing Interface Address: 11.1.4.2
Incoming Interface Address: 11.1.2.1
Prehop Router Address: 11.1.2.2
Protocol : PIM
Forward Ttl:1
SG Packet Count:255
Input Packet Count:9627
Input Rate(pps): 0xffffffff
Input Loss Rate: 0xffffffff
3 . Hop 3
Outgoing Interface Address: 11.1.2.2
Incoming Interface Address: 11.1.0.1
Prehop Router Address: 0.0.0.0
Protocol : PIM
Forward Ttl:1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Query Mode: max-hop
Current Probe:1
ResponseProb:1
Busy Count:0
Max Path Ttl:4
Response Rtt: 83
Forward Code:NO_ERROR
Current Path Ttl:4
Hop Time Delay(ms): 0xffffffff
Output Packet Count:9596
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:NO_ERROR
Current Path Ttl:3
Hop Time Delay(ms):327
Output Packet Count:9222
Output Rate(pps): 0xffffffff
SG Loss Rate: 0xffffffff
Forward Code:NO_ERROR
Current Path Ttl:2
6 NQA Configuration
440