Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Step 3 Run:
delete-member member-number
A member switch is deleted from the cluster.
----End

3.3.8 Checking the Configuration

After configuring basic HGMP functions, you can view the configuration.
Prerequisites
The configurations of the Basic HGMP are complete.
Procedure
l
l
l
l
l
l
l
----End
Example
If the NDP neighbor can be normally established, you can run the display ndp command to
check information about the MAC addresses of all the neighboring stations and the number of
the interface on the neighboring station that is connected to the local interface.
<Quidway> display ndp
Neighbor discovery protocol is enabled.
Neighbor Discovery Protocol Ver: 1, Hello Timer: 60(s), Aging Timer: 180(s)
Interface: GigabitEthernet1/0/1
Interface: GigabitEthernet1/0/2
If the NDP neighbor is normally established, you can run the display ndp interface command
to check information about the MAC address of the neighboring station and the number of the
interface on the neighboring station that is connected to the local interface.
Issue 01 (2012-03-15)
Run the display ndp to check the NDP configuration in the system view.
Run the display ndp interface { interface-type interface-number [ to interface-type
interface-number ] }&<1-10> to check the neighbor information detected through NDP on
a specified interface.
Run the display ntdp to check the global NTDP settings.
Run the display ntdp device-list [ verbose ] to check the device information collected
through NTDP.
Run the display cluster to check the status and statistics of cluster.
Run the display cluster candidates [ mac-address mac-address | verbose ] to check
information about candidate switches.
Run the display cluster members [ member-number | verbose ] to check information about
member switches.
Status: Disabled, Packets Sent: 0, Packets Received: 0, Packets Error: 0
Status: Enabled, Packets Sent: 114, Packets Received: 108, Packets Error: 0
Neighbor 1: Aging Time: 174(s)
MAC Address : 0018-8203-39d8
Port Name : GigabitEthernet1/0/1
Software Version: VRP 5.110 V200R001C00
Device Name : S9300
Port Duplex : FULL
Product Ver : S9300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
94