Huawei S9300 Configuration Manual page 81

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Enable global LLDP on SwitchA, SwitchB, and SwitchC.
# Configure SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] lldp enable
# Configure SwitchB.
Same as the configurations on SwitchA.
# Configure SwitchC.
Same as the configurations on SwitchA.
Step 2 Configure management addresses for SwitchA, SwitchB, and SwitchC.
# Configure SwitchA.
[SwitchA] lldp management-address 10.10.10.1
# Configure SwitchB.
[SwitchB] lldp management-address 10.10.10.2
# Configure SwitchC.
[SwitchC] lldp management-address 10.10.10.3
Step 3 Verify the configuration.
# Check whether LLDP function is enabled and management addresses are configured.
l View the configurations on SwitchA.
Issue 01 (2012-03-15)
Enable global LLDP on SwitchA, SwitchB, and SwitchC.
Configure management addresses for SwitchA, SwitchB, and SwitchC.
Management addresses for SwitchA, SwitchB, and SwitchC
[SwitchA] display lldp local
System information
--------------------------------------------------------------------------
Chassis
type :macAddress
Chassis ID :00e0-
fc33-0011
System name :SwitchA
System description :Quidway
Huawei Versatile Routing Platform
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 LLDP Configuration
66