Huawei S9300 Configuration Manual page 512

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l
Issue 01 (2012-03-15)
mpls
mpls te
mpls rsvp-te
mpls te cspf
#
explicit-path backup
next hop 30.1.1.2
next hop 40.1.1.2
next hop 3.3.3.3
#
explicit-path main
next hop 10.1.1.2
next hop 20.1.1.2
next hop 3.3.3.3
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 50000
mpls rsvp-te
#
interface Vlanif30
ip address 30.1.1.1 255.255.255.0
mpls
mpls te
mpls rsvp-te
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 3.3.3.3
mpls te tunnel-id 100
mpls te record-route
mpls te path explicit-path main
mpls te path explicit-path backup secondary
mpls te backup hot-standby wtr 15
mpls te backup ordinary best-effort
mpls te commit
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 10.1.1.0 0.0.0.255
network 1.1.1.1 0.0.0.0
network 30.1.1.0 0.0.0.255
mpls-te enable
#
nqa test-instance admin lsptrace
test-type lsptrace
lsp-type te
lsp-tetunnel Tunnel1/0/0 hot-standby
#
return
Configuration file of Switch B
#
sysname SwitchB
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
497