Huawei S9300 Configuration Manual page 487

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure Switch A as the client of the ICMP jitter test. The configuration details are not
mentioned here.
Step 2 Configure the event corresponding to the alarm on Switch A.
<SwitchA> system-view
[SwitchA] nqa event 10 log-trap
Step 3 Configure the alarm threshold.
[SwitchA] nqa test-instance admin icmpjitter
[SwitchA-nqa-admin-icmpjitter] test-type icmpjitter
[SwitchA-nqa-admin-icmpjitter] destination-address ipv4 11.1.1.20
[SwitchA-nqa-admin-icmpjitter] frequency 5
[SwitchA-nqa-admin-icmpjitter] alarm 10 lost-packet-ratio absolute rising-
threshold 100 10 falling-threshold 10 10
[SwitchA-nqa-admin-icmpjitter] quit
Step 4 Configure alarms to be sent to the NM station.
# Configure basic SNMP functions.
[SwitchA] snmp-agent community read public
[SwitchA] snmp-agent community write private
[SwitchA] snmp-agent sys-info version v2c
[SwitchA] snmp-agent trap enable feature-name nqa trap-name
nqafaillingalarmnotification
[RouterA] snmp-agent trap enable feature-name nqa trap-name
nqarisingalarmnotification
# Configure alarms to be sent to the NM station through the SNMP agent.
[SwitchA] snmp-agent target-host trap address udp-domain 11.1.2.8 params
securityname alarm v2c
Step 5 Verify the configuration.
<SwitchA> display nqa-event
NQA event information:
------------------------------------------------------
NQA Event Max: 100
------------------------------------------------------
<SwitchA> display nqa-alarm
Issue 01 (2012-03-15)
Configure the event corresponding to the alarm threshold.
Configure the alarm threshold.
Configure alarms to be sent to the NM station.
Start the test instance.
Number of the event corresponding to the threshold
Number of the alarm threshold
Upper threshold and lower threshold
IP address of the NM station
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NQA Event Number: 1
6 NQA Configuration
472