Huawei S9300 Configuration Manual page 216

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Figure 3-12 Networking diagram of configuring security features for an HGMP cluster
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2012-03-15)
NOTE
After NDP or NTDP is disabled on unrelated interfaces of member switches, if the new candidate switches
are connected to these unrelated interfaces, they cannot join the cluster until NDP or NTDP is enabled.
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster according to the steps described in
HGMP Functions for a
On the administrator switch, disable NDP and NTDP on unrelated interfaces of member
switches.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Cluster.
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
3.6.1 Example for Configuring Basic
201