Checking The Configuration; Maintaining Netstream - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream export index-switch index-switch
The type of the interface indexes contained in IPv4 exported packets is set.
By default, the interface indexes in the IPv4 NetStream exported packets contain 16 bits.
Step 3 Run:
ipv6 netstream export index-switch index-switch
The type of the interface indexes contained in IPv6 exported packets is set.
By default, the interface indexes in the IPv6 NetStream exported packets contain 16 bits.
----End

7.7.3 Checking the Configuration

Prerequisites
The configurations of the mapping of NetStream interface indexes are complete.
Procedure
Step 1 Run the display netstream global command to check the configuration of the current interface
index.
----End
Example
Check the configuration of the NetStream interface indexes.
[Quidway] display netstream global
ip netstream export version 9
ip netstream export index-switch 32
ipv6 netstream export index-switch 32
ip netstream aggregation as
enable
export version 9

7.8 Maintaining NetStream

This section describes how to clear NetStream statistics and debug NetStream.
Issue 01 (2012-03-15)
The version of the exported packets of original traffic is v9.
The version of the exported packets of the enabled aggregation traffic is v9.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
519