Huawei S9300 Configuration Manual page 430

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
[SwitchA-nqa-admin-lspjitter] start now
Step 6 View the test results.
[SwitchA-nqa-admin-lspjitter] display nqa results test-instance admin lspjitter
NQA entry (admin, lspjitter) :testflag is active ,testtype is lspjitter
1 . Test 1 result
----End
Configuration Files
l
Issue 01 (2012-03-15)
The test is finished
SendProbe:60
Completion :success
Min/Max/Avg/Sum RTT:1/1/1/60
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:0
Positive SD Number:0
Positive SD Square Sum :0
Max Negative SD:1
Negative SD Sum:1
Packet Loss Unknown:0
jitter out value:0.0162967
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100
#
mpls lsr-id 1.1.1.9
mpls
mpls te
mpls rsvp-te
mpls te cspf
#
interface Vlanif100
ip address 10.1.1.1 255.255.255.0
mpls
mpls te
mpls te bandwidth max-reservable-bandwidth 10000
mpls te bandwidth bc0 5000
mpls rsvp-te
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 3.3.3.9
mpls te tunnel-id 100
mpls te bandwidth ct0 3000
mpls te commit
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 10.1.1.0 0.0.0.255
network 1.1.1.9 0.0.0.0
mpls-te enable
#
nqa test-instance admin lspjitter
test-type lspjitter
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
RTT Square Sum:60
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Max Positive SD:0
Positive SD Sum:0
Min Negative SD:0
Negative SD Number:1
Negative SD Square Sum :1
Average of Jitter SD:1
6 NQA Configuration
415