Huawei S9300 Configuration Manual page 213

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
[HUAWEI_0.Administrator-1-cluster] display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
Management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 second(s)
Handshake hold-time:60 second(s)
IP pool:10.0.0.1/8
Logging host:4.0.0.1
SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 second(s)(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : enabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Synchronize configuration files.
# Run the configuration synchronization command on the administrator switch, and then member
switches synchronize configuration files to the FTP server (2.0.0.1) in NAT mode.
[HUAWEI_0.Administrator-1] cluster
[HUAWEI_0.Administrator-1-cluster] cluster-plug-play ip 2.0.0.1 username hgmp
password hgmp
[HUAWEI_0.Administrator-1-cluster] increment-config synchronization
Step 11 Verify the configuration.
After the previous configuration, run the display increment-synchronization-result command
on administrator switch to check whether configuration files are synchronized to the FTP server,
and you can view that success is displayed.
[HUAWEi_0.Administrator-1] display increment-synchronization-result
The result of member switchs' synchronization:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
1
2
3
On the FTP server, you can view that the names of configuration files are the MAC address of
member switches, which indicates that configuration synchronization is successful.
----End
Configuration Files
l
Issue 01 (2012-03-15)
: 10
: disabled
Device
S9300
S9300
S9300
Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 3
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
MacAddress
IpAddress
0002-0002-0002 10.0.0.2
0003-0003-0003 10.0.0.3
0004-0004-0004 10.0.0.4
3 HGMP Configuration
result
success
success
success
198

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents