Example For Checking An Rpf Path From The Multicast Source To The Destination Host Of A Specified Multicast Vpn Network - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l
l
l
6.35.31 Example for Checking an RPF Path from the Multicast
Source to the Destination Host of a Specified Multicast VPN
Network
This part provides examples for configuring an MTrace test to check the RPF path from the
multicast source to the destination host.
Issue 01 (2012-03-15)
mep mep-id 3 interface gigabitethernet 1/0/0.1 inward
mep ccm-send mep-id 3 enable
remote-mep mep-id 1
remote-mep ccm-receive mep-id 1 enable
remote-mep mep-id 2
remote-mep ccm-receive mep-id 2 enable
#
ospf 1
area 0.0.0.0
network 3.3.3.3 0.0.0.0
network 100.2.1.0 0.0.0.3
network 100.3.1.0 0.0.0.3
#
return
Configuration file of CE1
#
sysname CE1
#
interface GigabitEthernet1/0/0
undo shutdown
#
interface GigabitEthernet1/0/0.1
undo shutdown
vlan-type dot1q 10
ip address 10.1.1.1 255.255.255.0
#
return
Configuration file of CE2
#
sysname CE2
#
interface GigabitEthernet1/0/0
undo shutdown
#
interface GigabitEthernet1/0/0.1
undo shutdown
vlan-type dot1q 10
ip address 10.1.1.2 255.255.255.0
#
return
Configuration file of CE3
#
sysname CE3
#
interface GigabitEthernet1/0/0
undo shutdown
#
interface GigabitEthernet1/0/0.1
undo shutdown
vlan-type dot1q 10
ip address 10.1.1.3 255.255.255.0
#
return
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
486