Example For Configuring The Dns Test - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
nqa test-instance admin http
test-type http
destination-address ipv4 10.2.1.1
http-url www.huawei.com
#
ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
#
return

6.35.5 Example for Configuring the DNS Test

Networking Requirements
As shown in
is 10.2.1.1/24 through a domain named server.com.
Figure 6-7 Networking diagram for configuring the DNS test
Switch
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
Issue 01 (2012-03-15)
Figure 6-7, Switch functions as the DNS client to access the host whose IP address
GE1/0/0 10.1.1.2/24
VLANIF100
10.1.1.1/24
Configure the Switch as the NQA client.
Create and perform the DNS test on the Switch to check whether a connection between the
Switch and the DNS server can be set up and to check the speed of responding to an address
resolution request.
IP address of the DNS server
Name of the host to be accessed
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
server.com
10.2.1.1/24
IP
Network
DNS Server
10.3.1.1/24
6 NQA Configuration
391