Huawei S9300 Configuration Manual page 485

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
<SwitchA> system-view
[SwitchA] nqa-ftp-record ip-address 11.1.2.8
# Configure the user name for logging into the FTP server.
[SwitchA] nqa-ftp-record username ftp
[SwitchA] nqa-ftp-record password ftp
# Configure the file name for saving test results.
[SwitchA] nqa-ftp-record filename icmp
Step 2 Configure the number of test results to be saved in a file through FTP.
[SwitchA] nqa-ftp-record item-num 10010
Step 3 Configure the duration of saving test results through FTP.
[SwitchA] nqa-ftp-record time 2
Step 4 Send an alarm to the NM station after the FTP transmission succeeds.
[SwitchA] nqa-ftp-record trap-enable
Step 5 Enable the FTP server to save NQA test results through FTP on Router A.
[SwitchA] nqa-ftp-record enable
Step 6 Start the test instance.
[SwitchA] nqa test-instance admin icmp
[SwitchA-nqa-admin-icmp] test-type icmp
[SwitchA-nqa-admin-icmp] destination-address ipv4 11.1.1.10
[SwitchA-nqa-admin-icmp] start now
Step 7 Verify the configuration.
# Display the NQA test results of each switch.
<SwitchA> display nqa-ftp-record configuration
---------------NQA FTP SAVE RECORD CONFIGURATION---------------
----End
Configuration Files
l
Issue 01 (2012-03-15)
FUNCTION: ENABLE TRAP: ENABLE
IP-ADDRESS:11.1.2.8
VPN-INSTANCE:
USERNAME:ftp
PASSWORD:ftp
FILENAME:icmp
ITEM-NUM:10010
TIME:2
LAST FINISHED FILENAME:icmp20080605-150350.txt
Configuration file of Switch A
#
sysname SwitchA
vlan batch 10 20
#
interface Vlanif10
ip address 11.1.1.11 255.255.255.0
#
interface Vlanif20
ip address 11.1.2.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
470