Quickly Configuring Small-Sized Campus
2.2
Networks
Follow the procedure shown below to configure the switches and router. Once
configurations are complete, user devices within the campus can communicate with
each other, and intranet users can access the Internet.
Step 1 – Log in to
the switch.
Step 2 – Configure
the management IP
address and Telnet.
Step 3 – Configure
interfaces and
VLANs.
Step 4 – Configure
DHCP.
Step 5 – Configure
routing of CORE.
Step 9 – Save the
configuration.
Step 8 – Verify
services.
Step 7 – Configure
DHCP snooping and
Step 6 – Configure
the egress router.
5
IPSG.