Huawei S9300 Configuration Manual page 147

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
# Configure member switch 2.
[Member-2] ndp enable
[Member-2] interface gigabitethernet 1/0/1
[Member-2-GigabitEthernet1/0/1] ndp enable
[Member-2-GigabitEthernet1/0/1] quit
# Configure member switch 3.
[Member-3] ndp enable
[Member-3] interface gigabitethernet 1/0/1
[Member-3-GigabitEthernet1/0/1] ndp enable
[Member-3-GigabitEthernet1/0/1] quit
After the previous configuration, you can find that NDP on the administrator is in the Enable
state, the host name of the neighboring node is Device Name, and the name of the interface
connecting the neighboring node and the local interface is Port Name.
[Administrator-1] display ndp interface gigabitethernet 1/0/1 gigabitethernet 1/0/2
Interface: GigabitEthernet1/0/1
Interface: GigabitEthernet1/0/2
Step 3 Configure NTDP.
# On devices, enable NTDP in the system view and on the interface and configure the interval
and range for NTDP to collect topologies to 10 minutes and 3 hops respectively.
# Configure the administrator switch.
[Administrator-1] ntdp enable
[Administrator-1] ntdp timer 10
[Administrator-1] ntdp hop 3
[Administrator-1] interface gigabitethernet 1/0/1
[Administrator-1-GigabitEthernet1/0/1] ntdp enable
[Administrator-1-GigabitEthernet1/0/1] quit
[Administrator-1] interface gigabitethernet 1/0/2
[Administrator-1-GigabitEthernet1/0/2] ntdp enable
[Administrator-1-GigabitEthernet1/0/2] quit
# Configure member switch 1.
[Member-1] ntdp enable
[Member-1] ntdp timer 10
[Member-1] ntdp hop 3
[Member-1] interface gigabitethernet 1/0/1
[Member-1-GigabitEthernet1/0/1] ntdp enable
[Member-1-GigabitEthernet1/0/1] quit
[Member-1] interface gigabitethernet 1/0/2
[Member-1-GigabitEthernet1/0/2] ntdp enable
[Member-1-GigabitEthernet1/0/2] quit
# Configure member switch 2.
Issue 01 (2012-03-15)
Status: Enabled, Packets Sent: 0, Packets Received: 11, Packets Error: 0
Neighbor 1: Aging Time: 2(s)
MAC Address : 0002-0002-0002
Port Name : GigabitEthernet1/0/1
Software Version: Version 5.110 V200R001C00
Device Name : Member-1
Port Duplex : FULL
Product Ver : S9300
Status: Enabled, Packets Sent: 6, Packets Received: 16, Packets Error: 0
Neighbor 1: Aging Time: 5(s)
MAC Address : 0003-0003-0003
Port Name : GigabitEthernet1/0/1
Software Version: Version 5.110 V200R001C00
Device Name : Member-2
Port Duplex : FULL
Product Ver : S9300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
132