Configuring Static Routes - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Figure 9-2 Traffic distribution based on ECMP
Pre-configuration Tasks
Before configuring traffic distribution based on ECMP, complete the following tasks:
l
l
Data Preparation
To configure traffic distribution based on ECMP, you need the following data.
No.
1
2

9.4.2 Configuring Static Routes

Context
Through multiple static equal-cost routes, packets are forwarded to analysis devices according
to the specified load balancing mode.
Do as follows on the Switch where equal-cost routes need to be configured.
Issue 01 (2012-03-15)
S9300B
S9300A
GE 1/0/1
GE 1/0/2
Server 1 Server 2
Powering on the device normally
Setting IP addresses of interfaces
Data
IP addresses of interfaces
Static routes
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Upstream
S9300C
Traffic Splitter
XGE 2/0/1
GE 1/0/4
GE 1/0/3
Server 4
Server 3
9 Traffic Distribution Configuration
561