Configuring Parameters For Connecting The Ftp Server - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Data Preparation
To configure test results to be sent to the FTP server, you need the following data.
No.
1
2
3
4

6.32.2 Configuring Parameters for Connecting the FTP Server

This part describes how to set parameters for accessing the FTP server that receives the test
results, such as address of the FTP server and user name and password for accessing the FTP
server.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa-ftp-record ip-address ip-address
or
nqa-ftp-record vpn-instance vpn-instance
The IP address of the FTP server is configured.
Step 3 Run:
nqa-ftp-record username username
The user name for logging into the FTP server is configured.
Step 4 Run:
nqa-ftp-record password password
The password for logging into the FTP server is configured.
Step 5 Run:
nqa-ftp-record filename filename
The file name used for saving test results is configured.
----End
Issue 01 (2012-03-15)
Data
IP address of the FTP server
User name and password used for logging into the FTP server
Number of test results saved through FTP
Duration of saving test results through FTP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
373