Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l To perform the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ]
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.14.4 Checking the Configuration

After configuring the jitter test, you can view the test result.
Prerequisites
The configurations of the Jitter Test function are complete.
Context
Procedure
l
l
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
<Quidway> display nqa results test-instance admin jitter
NQA entry(admin, jitter) :testflag is inactive ,testtype is jitter
1 . Test 1 result
Issue 01 (2012-03-15)
hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ]
command.
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
Run the display nqa-server command to view the information about the NQA server.
The test is finished
SendProbe:60
Completion:success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/98/8/461
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:96
Positive SD Number:15
Positive SD Sum:172
Positive SD Square Sum :9868
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:23037
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:8
Positive DS Number:8
Positive DS Sum:18
Positive DS Square Sum :86
6 NQA Configuration
294