Huawei S9300 Configuration Manual page 493

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Step 2 Add Switch A and Switch B to VLAN 10.
# Configure Switch A.
<Quidway> system-view
<Quidway> sysname SwitchA
[SwitchA] vlan 10
[Switch-vlan10] quit
[SwitchA] interface gigabitethernet 1/0/1
[Switch-GigabitEthernet1/0/1] portswitch
[Switch-GigabitEthernet1/0/1] port default vlan 10
# Configure Switch B. Configurations performed on Switch B are similar to those on Switch A
and therefore are not provided here.
Step 3 Enable basic Ethernet CFM functions between Switch A and Switch B, and establish the mapping
relationship between the MA and VLAN 10.
# Configure Switch A.
<SwitchA> system-view
[SwitchA] cfm enable
[SwitchA] cfm md md1
[SwitchA-md-md1] ma ma1
[SwitchA-md-md1-ma-ma1] map vlan 10
[SwitchA-md-md1-ma-ma1] mep mep-id 1 interface gigabitethernet 1/0/1 outward
[SwitchA-md-md1-ma-ma1] remote-mep mep-id 2
[SwitchA-md-md1-ma-ma1] quit
[SwitchA-md-md1] quit
# Configure Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] cfm enable
[SwitchB] cfm md md1
[SwitchB-md-md1] ma ma1
[SwitchB-md-md1-ma-ma1] map vlan 10
[SwitchB-md-md1-ma-ma1] mep mep-id 2 interface gigabitethernet 1/0/1 outward
[SwitchB-md-md1-ma-ma1] remote-mep mep-id 1
[SwitchB-md-md1-ma-ma1] quit
[SwitchB-md-md1] quit
Run the display cfm remote-mep command on Switch A to view the status of Ethernet CFM.
The command output shows that the status of Ethernet CFM is Up.
[SwitchA] display cfm remote-mep
The total number of RMEPs is : 1
The status of RMEPS : 1 up, 0 down, 0 disable
--------------------------------------------------
MD Name
Level
MA Name
RMEP ID
Vlan ID
VSI Name
MAC
CCM Receive
Trigger-If-Down
CFM Status
Step 4 Configure a MAC ping test instance to detect the connectivity of a VLAN network.
Configure a VLAN MAC Ping test instance and start the test instance.
Issue 01 (2012-03-15)
NOTE
Each interface can be configured with only one MEP and the interface must be a Layer 2 interface.
: md1
: 0
: ma1
: 2
: 10
: --
: 0000-0121-0222
: enabled
: disabled
: up
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
478