Huawei S9300 Configuration Manual page 490

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Step 2 On Router A, configure the event that triggers test instance linkage and create a linked test
instance admin icmp.
[SwitchA] nqa event 10 linkage admin icmp
Step 3 On Router A, create an NQA ICMP Jitter test instance.
[SwitchA] nqa test-instance admin icmpjitter
[SwitchA-nqa-admin-icmpjitter] test-type icmpjitter
[SwitchA-nqa-admin-icmpjitter] destination-address ipv4 11.1.1.2
# Configure the alarm threshold.
[SwitchA-nqa-admin-icmpjitter] alarm 10 lost-packet-ratio absolute rising-
threshold 80 10 falling-threshold 10 10
Step 4 Start the test.
[SwitchA-nqa-admin-icmpjitter] start now
Step 5 Verify the configuration.
# Check information about the event that triggers test instance linkage.
<SwitchA> display nqa event
NQA Event Information:
--------------------------------------------------------------------------------
Event-Entry
--------------------------------------------------------------------------------
10
# Check alarm information about all test instances.
<SwitchA> display nqa alarm
NQA Alarm Information:
---------------------------------------------------------------------------
Admin-Name
---------------------------------------------------------------------------
admin
admin
# Check the status of the NQA client.
<SwitchA> display nqa-agent
NQA Tests Max:2000
NQA Flow
nqa test-instance admin icmp
test-type icmp
destination-address ipv4 11.1.1.2
nqa status : normal
nqa test-instance admin icmpjitter
test-type icmpjitter
destination-address ipv4 11.1.1.2
alarm 10 lost-packet-ratio absolute rising-threshold 80 10 falling-threshold 10
10
nqa status : normal
# Check the NQA test result.
<SwitchA> display nqa results
NQA entry(admin, icmp) :testflag is inactive ,testtype is icmp
1 . Test 1 result
Issue 01 (2012-03-15)
Event-type
linkage
Operation-Tag
icmpjitter
icmpjitter
Max:1000
The test is finished
Send operation times: 3
Completion:failed
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:11.1.1.2
Min/Max/Average Completion Time: 0/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description Admin-Name
admin
Alarm-Entry AlarmType
10 Rising
10 Falling
NQA Tests Number:
NQA Flow Remained:1000
Receive response times: 0
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:3
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
Operation-Tag
icmp
Event-Entry
10
10
2
475