Huawei S9300 Configuration Manual page 40

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Context
Steps 4, 5, and
configurations, basic SNMP communication can be conducted between the NM station and
managed device.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 (Optional) Run:
snmp-agent
The SNMP agent function is enabled.
By default, the SNMP agent function is disabled. Running any command with the parameter
snmp-agent can enable the SNMP agent function, so this step is optional.
Step 3 (Optional) Run:
snmp-agent sys-info version v3
The SNMP version is set.
By default, SNMPv3 is enabled. So, this step is optional.
Step 4 Run:
snmp-agent group v3 group-name [ authentication | privacy ]
An SNMPv3 user group is configured.
If the network or network devices are in an environment lacking security (for example, the
network is vulnerable to attacks), authentication or privacy can be configured in the command
to enable data authentication or encryption.
The available authentication and encryption modes are as follows:
l No authentication and no encryption: authentication and privacy are not configured in the
l Authentication without encryption: Only authentication is configured in the command. This
l Authentication and encryption: privacy is configured in the command. This mode is
Step 5 Run:
snmp-agent usm-user v3 user-name group-name [ authentication-mode { md5 | sha }
password [ privacy-mode des56 password ] ]
A user is added to the SNMPv3 user group.
Issue 01 (2012-03-15)
6 are mandatory for the configuration of basic SNMP functions. After the
command. This mode is applicable to secure networks managed by a specified administrator.
mode is applicable to secure networks managed by many administrators who may frequently
perform operations on the same device. In this mode, only the authenticated administrators
can access the managed device.
applicable to insecure networks managed by many administrators who may frequently
perform operations on the same device. In this mode, only the authenticated administrators
can access the managed device, and transmitted data is encrypted to guard against
interception and data leaking.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
25