Configuring Universal Nqa Test Parameters; Establishing The Configuration Task - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l
l
<Quidway> display nqa results
NQA entry(admin, pwe3trace) :testflag is inactive ,testtype is pwe3trace

6.28 Configuring Universal NQA Test Parameters

This section describes how to set and use universal parameters for NQA test instances.

6.28.1 Establishing the Configuration Task

Before setting universal parameters for NQA test instances, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
Applicable Environment
NQA supports not only the configuration of the parameters for various types of tests, but also
the configuration of universal options of a test group.
Issue 01 (2012-03-15)
– Number of wrong sequence numbers
– Timeout times of the test packets
History statistics of each test packet
– Timestamp added when each test packet is sent
– Timestamp added when each test packet is received
– Packets status displayed on the NQA client
Statistics of results of each test
– Number of successful tests
– Sum of the response time of all tests
– RTT square sum
– Minimum RTT and maximum RTT of the packet
– Destination IP address and the type of the destination IP address
– Number of the Echo packets and the sent packets
– Time when the last packet is received
1 . Test 1 result The test is finished
Completion:success
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Drop operation number:0
Last good path Time:2009-2-28 10:58:35.5
1 . Hop 1
Send operation times: 3
Min/Max/Average Completion Time: 4/10/7
Sum/Square-Sum Completion Time: 23/197
RTD OverThresholds number: 0
Last Good Probe Time: 2009-2-28 10:58:35.4
Destination ip address:3.14.99.3
Lost packet ratio: 0 %
2 . Hop 2
Send operation times: 3
Min/Max/Average Completion Time: 7/9/8
Sum/Square-Sum Completion Time: 24/194
RTD OverThresholds number: 0
Last Good Probe Time: 2009-2-28 10:58:35.5
Destination ip address:12.14.21.12
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Attempts number:1
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
Receive response times: 3
Receive response times: 3
6 NQA Configuration
355