Huawei S9300 Configuration Manual page 201

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Handshake timer:10 second(s)
Handshake hold-time:60 second(s)
IP pool:10.0.0.1/8
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 second(s)(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 1 member(s) in the cluster, and 0 of them are down.
On the administrator switch, check information about candidate switches, you can find all the
candidate switches and their types.
[HUAWEI_0.Administrator-1-cluster] display cluster candidates
[HUAWEI_0.Administrator-1-cluster] display cluster candidates
MAC
0004-0004-0004
0003-0003-0003
0002-0002-0002
Step 6 Add member switches.
# Add all candidate switches to the cluster.
[HUAWEI_0.Administrator-1-cluster] auto-build
Collecting candidate list, please wait...
Candidate list:
Name
Member-1
Member-2
Member-3
Warning: Add all to cluster?(Y/N) y
Info: Cluster auto-build is complete.
Added 3 member(s) into the cluster successfully.
After the previous configuration, check information about the administrator switch and member
switches in the cluster on the administrator switch. You can find that all the member switches
are added to the cluster and in the Up state.
[HUAWEI_0.Administrator-1-cluster] display cluster members
The list of cluster member:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
0
1
2
3
Step 7 Assign an IP address to VLANIF 10.
# To ensure the normal communication between member switches in the cluster and devices out
of the cluster, assign an IP address to VLANIF 10 on the administrator switch.
# Assign an IP address to VLANIF 10.
[HUAWEI_0.Administrator-1] interface vlanif 10
[HUAWEI_0.Administrator-1-Vlanif10] ip address 1.0.0.1 8
[HUAWEI_0.Administrator-1-Vlanif10] quit
Issue 01 (2012-03-15)
HOP IP
2 10.0.0.4/8
1 10.0.0.3/8
1 10.0.0.2/8
NOTE
l Following steps can be performed only on the administrator switch.
l Take the mode of automatically adding member switches as an example. To add member switches
manually, see Adding a Member
Device Type
S9300
S9300
S9300
S9300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S9300
S9300
S9300
Switch.
Hop MAC Address
1 0002-0002-0002
1 0003-0003-0003
2 0004-0004-0004
MAC Address Status Device Name
0001-0001-0001 Admin
0002-0002-0002 Up
0003-0003-0003 Up
0004-0004-0004 Up
3 HGMP Configuration
DeviceType
S9300
S9300
S9300
HUAWEI_0.Administrator-1
HUAWEI_1.Member-1
HUAWEI_2.Member-2
HUAWEI_3.Member-3
186