Creating A Record And Entering The Record View; Configuring Aggregation Key Words Of Records - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Data Preparation
To complete the configuration, you need the following data.
No.
1
2

7.6.2 Creating a Record and Entering the Record View

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream record record-name
A record is created and the record view is displayed.
----End

7.6.3 Configuring Aggregation Key Words of Records

Context
Do as follows on the S9300&S9300E where the Flexible NetStream feature needs to be
configured.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream record record-name
The record view is displayed.
Step 3 Run:
match ip { destination-address | destination-port | dscp | flow-label | protocol |
source-address | source-port }
The aggregation key words of records are configured.
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
Data
Name and number of the interface on which
traffic statistics need to be collected
IP addresses and port numbers of the NSC
515