Configuring A Threshold For The Nqa Alarm; Establishing The Configuration Task - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Prerequisites
The configurations of the Test Results to Be Sent to the FTP Server function are complete.
Procedure
Step 1 Run the display nqa-ftp-record configuration command to Check the configuration for saving
NQA test results.
----End
Example
Run the display nqa-ftp-record configuration command to check the configuration for saving
NQA test results.
<Quidway> display nqa-ftp-record configuration
---------------NQA FTP SAVE RECORD CONFIGURATION---------------

6.33 Configuring a Threshold for the NQA Alarm

This section describes how to set an alarm threshold for test results. When the number of test
results exceeds the threshold, a trap message is sent to the NMS for notification.

6.33.1 Establishing the Configuration Task

Before setting an alarm threshold for test results, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
The user can monitor the network by configuring an alarm threshold. After monitoring
conditions are configured, when the monitored item in the test result exceeds the configured
upper or lower threshold, the device sends alarms to the NM station. Therefore, the user can
monitor the real-time operation status of the network.
Pre-configuration Tasks
Before configuring the threshold for the NQA alarm, complete the following task:
l
Data Preparation
To configure the threshold for the NQA alarm, you need the following data.
Issue 01 (2012-03-15)
FUNCTION: ENABLE TRAP: DISABLE
IP-ADDRESS:11.1.1.8
VPN-INSTANCE:
USERNAME:wang
PASSWORD:123
FILENAME:icmp
ITEM-NUM:10010
TIME:2
LAST FINISHED FILENAME:icmp20080605-150350.txt
Configuring a test instance
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
377