Huawei S9300 Configuration Manual page 545

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
# After successful configurations, run the display netstream all command in the user view of
Switch B to check the configurations.
<SwitchB> display netstream all
system
ip netstream export version 9
ip netstream export source 10.2.1.1
ip netstream export host 10.2.1.2 6000
ip netstream record test
match ip destination-address
match ip destination-port
collect counter packets
collect counter bytes
collect interface inpu
collect interface output
slot 0
GigabitEthernet1/0/0
ip netstream inbound
ip netstream outbound
ip netstream sampler fix-packets 100 inbound
ip netstream sampler fix-packets 100 outbound
port ip netstream record test
# View the traffic statistics on the board in slot 1.
<SwitchB> display ip netstream statistic slot 1
=====Netstream statistics:=====
Origin ingress entries
Origin ingress packets
Origin ingress octets
Origin egress entries
Origin egress packets
Origin egress octets
Origin total entries
Handle origin entries
Handle As aggre entries
Handle ProtPort aggre entries
Handle SrcPrefix aggre entries
Handle DstPrefix aggre entries
Handle Prefix aggre entries
Handle AsTos aggre entries
Handle ProtPortTos aggre entries : 5
Handle SrcPreTos aggre entries
Handle DstPreTos aggre entries
Handle PreTos aggre entries
Record test handle entries
----End
Configuration Files
Configuration file of Switch A
#
sysname SwitchA
#
vlan 100
#
interface Vlanif 100
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
return
Issue 01 (2012-03-15)
: 572
: 56122
: 6762976
: 57
: 3588
: 394680
: 629
: 620
: 12
: 11
: 10
: 15
: 7
: 6
: 5
: 4
: 1
: 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 NetStream Configuration
530