Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
interface vlanif vlan-id
The interface to send multicast NTP packets is specified.
Step 4 Run:
ntp-service multicast-server [ authentication-keyid key-id | version number ]
The ID of the authentication key used by the NTP multicast server is configured.
For configuring the multicast client, see
----End

4.4.8 Checking the Configuration

After NTP security mechanisms are configured, you can view the configuration.
Prerequisites
The configurations of the NTP Security Mechanisms are complete.
Procedure
l
l
----End
Example
Run the display ntp-service status command to view the status of the NTP service.
<Quidway> display ntp-service status
clock status: synchronized
clock stratum: 2
reference clock ID: LOCAL(0)
nominal frequency: 60.0002 Hz
actual frequency: 60.0002 Hz
clock precision: 2^18
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 10.00 ms
reference time: 15:51:36.259 UTC Apr 25 2010(C6179088.426490A3)
Run the display ntp-service sessions [ verbose ] command to view the status of NTP sessions.
Issue 01 (2012-03-15)
Run the display ntp-service status command to view the status of the NTP service.
Run the display ntp-service sessions [ verbose ] command to view the status of NTP
sessions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuring the Broadcast
4 NTP Configuration
*
Mode.
231