S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
SN
------------------------------------------------------------------------
2
3
Interfaces running NDP and NTDP are not required on member switches. If NDP and NTDP
are disabled successfully, run the display member-interface-state command, and you can view
that success is displayed.
<HUAWEI_0.Quidway> display member-interface-state ndp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
3
2
1
[HUAWEI_0.Quidway-cluster] display member-interface-state ntdp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
3
2
1
If member switches are successfully restarted, run the display member-reboot-state command,
and you can view that success is displayed.
<Quidway> display member-reboot-state
The result of member switches rebooting:
------------------------------------------------------------------------
SN
------------------------------------------------------------------------
1
2
------------------------------------------------------------------------
If the current configurations are successfully saved on member switches, run the display
member-save-state command, and you can view that success is displayed.
<Quidway> display member-save-state
The result of member switches saving:
------------------------------------------------------------------------
SN
------------------------------------------------------------------------
1
2
------------------------------------------------------------------------
If member switches successfully synchronize configuration files to the FTP server, run the
display synchronization-result command, and you can view that success is displayed.
<Quidway> display synchronization-result
The result of member switches' synchronization:
------------------------------------------------------------------------------
SN
------------------------------------------------------------------------------
1
2
3
3.5 Maintaining HGMP
This section describes how to clear the statistics on NDP, and monitor the operation status of
the HGMP cluster.
Issue 01 (2012-03-15)
Device
S9300
S9300
Device
MacAddress
S9300
0004-0004-0004
S9300
0003-0003-0003
S9300
0002-0002-0002
Device
MacAddress
S9300
0004-0004-0004
S9300
0003-0003-0003
S9300
0002-0002-0002
Device
S9300
S9300
Device
S9300
S9300
Device
MacAddress
S9300
0002-0002-0002 10.0.0.2
S9300
0003-0003-0003 10.0.0.3
S9300
0004-0004-0004 10.0.0.4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
MacAddress
IPAddress
0002-0002-0002
10.0.0.2
0003-0003-0003
10.0.0.3
IpAddress
10.0.0.4
10.0.0.3
10.0.0.2
IpAddress
10.0.0.4
10.0.0.3
10.0.0.2
MacAddress
IPAddress
0002-0002-0002
10.0.0.2
0003-0003-0003
10.0.0.3
MacAddress
IPAddress
0002-0002-0002
10.0.0.2
0003-0003-0003
10.0.0.3
IpAddress
3 HGMP Configuration
Result
success
success
result
success
success
success
result
success
success
success
Result
success
success
Result
success
success
result
success
success
success
106