Huawei S9300 Configuration Manual page 154

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
When Member-1, Member-2, and Member-3 are required to send packets to the SNMP host, a
connection can be set up between the SNMP host out of the cluster and member switches in
NAT or non-NAT mode.
Figure 3-6 Networking diagram of configuring devices in the HGMP cluster to access the
outside SNMP host (in NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
Issue 01 (2012-03-15)
NOTE
In this configuration example where the NAT mode is adopted, Member-3 accesses the outside SNMP host
(3.0.0.1/8).
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in Example for Configuring Basic HGMP Functions for a
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
Cluster.
139