Example For Configuring The Batch Restart Function For An Hgmp Cluster - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
3.6.7 Example for Configuring the Batch Restart Function for an
HGMP Cluster
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member switches Member-2 and Member-3 are required to be restarted.
Issue 01 (2012-03-15)
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
cluster
mngvlanid 10
administrator-address 0001-0001-0001 name HUAWEI
#
return
Figure 3-9, all the Layer 2 switches belong to the same cluster. Administrator-1 is
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
170