Configuring The Nqa Mtrace Test To Check The Rpf Path From The Multicast Source To The Querier; Establishing The Configuration Task - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to check results
on the NQA client.
----End
Example
If the ICMP jitter test succeeds, you can view the following information by running the display
nqa results command.
<Quidway> display nqa results test-instance admin icmpjitter
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result
6.20 Configuring the NQA MTrace Test to Check the RPF
Path from the Multicast Source to the Querier
This section describes how to configure a Multicast Traceroute (MTrace) test to check the
Reserved Path Forwarding (RPF) path from the multicast source to the querier.

6.20.1 Establishing the Configuration Task

Before configuring an MTrace test for the RPF path from the multicast source to the querier,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain the required data. This can help you complete the configuration task quickly and
accurately.
Issue 01 (2012-03-15)
The test is finished
SendProbe:60
Completion :success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/3/1/65
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:3
Positive SD Number:18
Positive SD Sum:22
Positive SD Square Sum :32
Min Negative SD:1
Max Negative SD:2
Negative SD Number:21
Negative SD Sum:22
Negative SD Square Sum :24
Min Delay SD:0
Avg Delay SD:0
Max Delay SD:0
Delay SD Square Sum:4
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:1
jitter out value:0.5599658
NumberOfOWD:60
OWD SD Sum:4
ICPIF value: 0
TimeStamp unit: ms
Packet Rewrite Ratio: 0%
Packet Disorder Ratio: 0%
Fragment-disorder Ratio: 0%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:77
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:1
Positive DS Number:15
Positive DS Sum:15
Positive DS Square Sum :15
Min Negative DS:1
Max Negative DS:1
Negative DS Number:14
Negative DS Sum:14
Negative DS Square Sum :14
Min Delay DS:0
Avg Delay DS:0
Max Delay DS:0
Delay DS Square Sum:1
Packet Loss DS:0
Average of Jitter:1
Average of Jitter DS:1
jitter in value:0.3574005
Packet Loss Ratio: 0%
OWD DS Sum:1
MOS-CQ value: 0
Packet Rewrite Number: 0
Packet Disorder Number: 0
Fragment-disorder Number: 0
6 NQA Configuration
320