Establishing The Configuration Task; Configuring The Dns Test Parameters - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management

6.9.1 Establishing the Configuration Task

Before configuring a DNS test, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
The DNS test is performed to obtain the speed at which the specified domain name is resolved
to an IP address.
Pre-configuration Tasks
Before configuring the DNS test, complete the following tasks:
l
l
Data Preparation
To configure the DNS test, you need the following data.
No.
1
2
3
4

6.9.2 Configuring the DNS Test Parameters

This part describes how to set DNS test parameters.
Context
Do as follows on the NQA client (DNS client):
Procedure
Step 1 Run
system-view
The system view is displayed.
Step 2 Run:
dns resolve
Enable dynamic DNS resolution. By default, the function is disabled.
Step 3 Run:
Issue 01 (2012-03-15)
Configuring the DNS server
Configuring routes between the NQA client and the DNS server
Data
Administrator name and test name
IP address of the DNS server
Host name to be resolved
Start mode and end mode of the test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
276