Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l To perform the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ]
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.33.5 Checking the Configuration

After the alarm threshold for test results is set, you can view the configuration.
Prerequisites
The configurations of the Threshold for the NQA Alarm function are complete.
Procedure
l
l
l
----End
Example
Run the display nqa-event command to check the maximum number of events that can be
configured and the number of events that are configured.
<Quidway> display nqa-event
NQA event information:
------------------------------------------------------
NQA Event Max: 5
------------------------------------------------------
Run the display nqa alarm command to check the maximum number of alarms that can be
configured and the number of alarms that are configured.
[Quidway-nqa-admin-icmp] display nqa alarm
NQA alarm information:
------------------------------------------------------
NQA Alarm Max: 5
------------------------------------------------------
Run the display nqa-agent command to check the status of the test instance configured on the
NQA client.
Issue 01 (2012-03-15)
hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ]
command.
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
Run the display nqa-event command to check the maximum number of events that can be
configured and the number of events that are configured.
Run the display nqa alarm command in the NQA view to check the maximum number of
alarms that can be configured and the number of alarms that are configured.
Run the display nqa-agent [ admin-name test-name ] [ verbose ] command to Check the
status of the test instance configured on the NQA client.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NQA Event Number: 1
NQA Alarm Number: 2
6 NQA Configuration
380