Example For Configuring The Ftp Upload Test - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management

6.35.3 Example for Configuring the FTP Upload Test

Networking Requirements
As shown in
You are required to test the speed of uploading a file from Switch C to the FTP server.
Figure 6-5 Networking diagram for configuring the FTP upload test
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure reachable routes between Switch A and Switch B, between Switch A and Switch C,
and between Switch B and Switch C. The configuration details are not mentioned here.
Step 2 Configure Switch C as the FTP server.
<SwitchC> system-view
[SwitchC] ftp server enable
[SwitchC] aaa
Issue 01 (2012-03-15)
#
aaa
local-user user1 password cipher 3MQ*TZ,O3KCQ=^Q`MAF4<1!!
local-user user1 service-type ftp
local-user user1 ftp-directory cfcard:
#
return
Figure 6-5:
SwitchA
GE1/0/0 GE1/0/0
VLANIF10 VLANIF10
FTP
10.1.1.1/24
10.1.1.2/24
Client
Configure Switch A as the NQA client and the FTP client. Create and perform the FTP test
on Switch A to check whether a connection between Switch A and the FTP server can be
set up and to test the time for uploading a file to the FTP server.
A user with the name user1 and the password hello logs in to the FTP server to upload a
file whose size is 10k.
IP address of the FTP server
Source IP address for the test
FTP user name and password
Size of the uploaded file
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchB
GE2/0/0
VLANIF20
10.2.1.1/24
6 NQA Configuration
SwitchC
GE1/0/0
VLANIF20
10.2.1.2/24 FTP
Server
387