Configuring The Ntp Primary Clock; Configuring The Time Interval To Update Client Clock - Huawei S9300 Configuration Manual

Table of Contents

Advertisement

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
No.
4
5

4.3.2 Configuring the NTP Primary Clock

The stratum configured for the master clock on the server must be lower than the stratum
configured for the clock on the client. Otherwise, the clock on the client cannot synchronize with
the master clock on the server.
Context
If you want to configure a switch to provide a primary NTP clock, do as follows on the switch
functioning as the NTP server.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ntp-service refclock-master [ ip-address ] [ stratum ]
A primary NTP server is displayed.
ip-address is the IP address of the local reference clock. Its value is 127.127.t.u. Here, "t" ranges
from 0 to 37. Currently, "t" can be only 1, indicating the local reference clock. "u" indicates the
NTP process number, ranging from 0 to 3.
When no IP address is specified, the local clock whose IP address is 127.127.1.0 functions as
the primary NTP clock by default, with the stratum being 8.
----End

4.3.3 Configuring the Time Interval to Update Client Clock

When the server clock is changed, the client clock should be synchronized to the server clock
within the configured time interval.
Issue 01 (2012-03-15)
Data
Preparing the data according to the operation mode
l Client/Server mode: IP address of the server and the VPN instance that the server
belongs to
l Peer mode: IP address of the symmetric passive end and the VPN instance that it
belongs to
l Broadcast mode: interfaces to send and receive broadcast NTP packets and the
maximum sessions set up dynamically on the client
l Multicast mode: IP address of the multicast group, the TTL value of the multicast
packets, the interfaces to send and receive the multicast packets, and the maximum
number of the session dynamically set up on the client
Interface disabled from receiving NTP packets
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 NTP Configuration
217

Advertisement

Table of Contents
loading

This manual is also suitable for:

S9300e

Table of Contents