Huawei S9300 Configuration Manual page 53

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
<Quidway> display snmp-agent mib-view viewname allexthgmp
View name:allexthgmp
# Check the target host.
<Quidway> display snmp-agent target-host
Target-host NO. 1
-----------------------------------------------------------
IP-address
Source interface : -
VPN instance
Security name
Port
Type
Version
Level
NMS type
With ext-vb
-----------------------------------------------------------
# When an alarm is generated, run the display trapbuffer command to view the details.
<Quidway> display trapbuffer
Trapping buffer configuration and contents : enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 98
#Oct 11 2010 18:57:59 RouterA DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011
.5.25.191.3.1 configurations have been changed. The current change number is 95,
the change loop count is 0, and the maximum number of records is 4095.
# Check the equipment administrator's contact information.
<Quidway> display snmp-agent sys-info contact
The contact person for this managed node:
----End
Configuration Files
Configuration file of the switch
#
vlan batch 100
#
acl number 2001
rule 5 permit source 1.1.1.2 0
rule 6 deny source 1.1.1.1 0
#
interface Vlanif100
ip address 1.1.2.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
ospf 1
area 0.0.0.0
network 1.1.2.0 0.0.0.255
Issue 01 (2012-03-15)
MIB Subtree:hwCluster
Subtree mask:FF80(Hex)
Storage-type: nonVolatile
View Type:excluded
View status:active
: 1.1.1.2
: -
: 1.1.2.1
: 162
: inform
: v2c
: No authentication and privacy
: NMS
: No
call Operator at 010-12345678
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
38