Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
The test instance view is displayed.
Step 3 Run:
start now
The NQA MTrace test is started.
Step 4 Run:
quit
Exit from the test instance view.
----End

6.20.6 Checking the Configuration

After performing the MTrace test for the RPF path from the multicast source to the querier, you
can view the test result.
Prerequisites
The configurations of the NQA MTrace Test function are complete.
Context
Procedure
l
l
l
l
----End
Example
Run the display nqa-agent command. If information about the NQA test is displayed, it means
that the test is successful. For example:
<Quidway> display nqa-agent admin aa verbose
nqa test-instance aa aa
test-type mtrace
Issue 01 (2012-03-15)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Run the display nqa-agent [ admin-name test-name ] [ verbose ] to view the status of the
test instance configured on the NQA client.
Run the display nqa results command to view the test results on the NQA client.
Run the display nqa history command to view the history of the NQA test.
Run the display mtrace statistics command to view the statistics of the MTrace packets.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
324