Huawei S9300 Configuration Manual page 55

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
l
l
Procedure
Step 1 Configure available routes between the switch and the NM stations. Details for the configuration
procedure are not provided here.
Step 2 Enable the SNMP agent.
<Quidway> system-view
[Quidway] snmp-agent
Step 3 Configure the switch to run SNMPv3.
[Quidway] snmp-agent sys-info version v3
# Check the configured SNMP version.
[Quidway] display snmp-agent sys-info version
SNMP version running in the system:
Step 4 Configure the NM stations' access rights.
# Configure an ACL to allow NMS2 to manage and disallow NMS1 from managing the
switch.
[Quidway] acl 2001
[Quidway-acl-basic-2001] rule 5 permit source 1.1.1.2 0.0.0.0
[Quidway-acl-basic-2001] rule 6 deny source 1.1.1.1 0.0.0.0
[Quidway-acl-basic-2001] quit
# Configure a MIB view.
[Quidway] snmp-agent mib-view included testview iso
[Quidway] snmp-agent mib-view excluded testview 1.3.6.1.4.1.2011.6.7
Issue 01 (2012-03-15)
Enable the SNMP agent.
Configure the switch to run SNMPv3.
Configure an ACL to allow NMS2 to manage every MIB object except HGMP on the
switch and configure data encryption.
Configure the trap function to allow the switch to send alarms to NMS2.
Configure the equipment administrator's contact information on the switch.
Configure NMS2.
SNMP version
User group name
User name and password
Authentication and encryption algorithms
ACL number
IP address of the NM station
Equipment administrator's contact information
SNMPv3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
40